The Wireless Pump Controller is the perfect accessory if you want to control pumps, valves, alarms, or other systems remotely using your Smart Water system. Customised start/stop levels can be set directly via the WiFi LCD Keypad or WiFi Gateway, and also via the free iOS/Android app. Fully automatic "plug and play" pump operation is now possible with endless possibilities through the suite of options and settings that are offered. This version is rated at 120VAC. Rated for 10 Amps, can upgrade to 15A by removing the 10A connectors attached to the ends of the wire and making a direct connection.
 
Maximum current 15 Amps when direct wired.
Plugs are rated for 10 Amps only. 
For pumps or other large induction loads a relay or contactor is recommended. 
A 120V 1.5hp pump can have 40+ amps of starting current.
Setup tip: It’s much easier with the App!
When one of the manual override buttons on the front of the controller is pressed, you will need to re-set the automatic operation parameters in the app or on the hub touchscreen